The Hoard of Ghaundal - 5e Miniatures & Adventures
Created by Mammoth Factory
Embark on a legendary quest to find the ancient hoard of a mythical dragonlord. An epic 8 chapter 5e campaign, with premium miniatures!
Please note that shipping costs will be charges later, but will be similar to the costs estimates on our Kickstarter.
Latest Updates from Our Project:
STL Stretch Goals Delivered + Prototypes: Dice, DM Screen, Coin, Boxes, Book Covers WIP and more
25 days ago
– Tue, Apr 16, 2024 at 10:25:22 AM
Greetings, Mammoths!
Prototypes incoming, Mammoth excitement through the roof!
IN THIS UPDATE:
Book Updates
DM Screen update
Coin & pin update
Dice update
Physical Miniature update
STL Stretch Goal Delivery
BOOK Proofing for the Hoard Of Ghaundal is at its final stages, and we will be able to start test printing very shortly. Covers for both version of the book are close to finalized as well, almost final version (With some comment editing comments as Works in Progress do):
DM Screen Our Dungeon Master’s screen is close to done. Formatting is in progress and once done we can proceed to the printers! Our DM Screen will feature a Magic item generator you might have seen being tested over on our Discord server. Have a try at it yourself and tell us what you think!
Character And Hero pack We had the first print of the boxes, we understood what needed to change: Some text was too small or too close to the box edge. We are also testing a slightly bigger box on the next print run. Here is the first print version:
Coin & Pin We are working with our manufacturer on finishing the coin design. Here is the final layout:
Here are the first photos of our pin prototypes- fresh out of the metal shop, yet unpainted:
Dice Both dice sets have started tooling- that is the mold making! We had to add some laser engraved details to the D4 to accommodate our delicate design. It will cost us a bit more to manufacture, but feels like the correct decision in order to make the best looking dice we can. We are prototyping 4 color combinations for the Magma dice (Soft edge), just to make sure we have the best fit to our vision. We are quite happy with how these are turning out- you can see them here:
Look at the specks of "ash" we managed to add to these dice!
Physical Miniature By the time you read this, we have started manufacturing the final test run of our industrial resin 3d printed miniatures. This means all the mass produced packs: Owlbear Pack, Hero Pack, Character Pack, Giant Ettin, Dragolord Ghaundal, The Village and the Overseer, AND all 8 sets of miniature collections. If it sounds like a lot- it’s because it is! After printing is done, our CEO will be inspecting all the prints at our manufacturing partner’s facility personally. We will be triple checking the manufacturing, packing and sorting procedures to ensure this to be as precise and orderly as possible.
STL Stretch Goal Delivery STL rewards have been delivered to your the MyMiniFactory accounts at the start of March, and the stretch Goal STL Rewards were delivered earlier this week. Other Digital rewards will be delivered once completed. If you cannot locate your Digital rewards, please let us know at [email protected]
Tax & Shipping are charged at a later date 🦺 The final Tax & shipping costs will be charged once we have made all the prototypes and we know how much the product weighs and we know your address, so please hang on tight until we get those final numbers down.
Where is my survey link? If you can’t find it in your kickstarter email - Please check your spam folder. If you can't find it there, reach out to us with (1) your name (2) pledge number, at our email provided above.
Where are my digital Files? You can track the progress on this Production Sheet. Our PDFs are not ready yet, but the STLs have been sent via MyMiniFactory already.
Your feedback and support are the wind in our sails, and we're thrilled to be on this journey with you. As always, thank you for being such a fundamental part of the Mammoth family!
If you LOVE grim-dark, look no further. Honestly just stop it.
Alexey and his team make the most incredible - scary disturbing - fantastic - SUPER HIGH QUALITY Grim dark miniatures for wargaming and RPG. we simply cannot shut up about them.
If you DARE to be this gruesome... you MUST have a look at their upcoming Kickstarter: Tormentor Cults!
[Action Required] Backerkit Survey / Upgrade Deadline 29th FEB + Behind the scenes previews!
3 months ago
– Wed, Feb 07, 2024 at 12:51:22 PM
Greetings, Mammoths!
We are hard at work editing and rewriting some sections of the book before it goes into final proofing. Working on story continuity, fleshing out NPCs, location and working on an epic loot table generator! (Will be revealed in the next update).
In this update:
Deadline to fill surveys is 29th of February 2024.
WIP of Dice layout, Magic Item & Character Cards and a few minis.
BACKERKIT
150 of you have yet to confirm your backer kit survey!
Note - Even if you have nothing to add, or have only digital files. We would appreciate it if you confirm the order anyway, so we know that your order is correct.
Confirm Address, Upgrade or Add-ons
At the beginning of January, we dispatched a survey link for you to confirm your shipping address, as well as to offer you the opportunity to upgrade your pledge or select add-ons items you'd like.
Tax & Shipping are charged at a later date 🦺
The final Tax & shipping costs will be charged once we have made all the prototypes and we know how much the product weighs and we know your address, so please hang on tight until we get those final numbers down.
Where is my survey link? If you can’t find it in your Kickstarter email - Please check your spam folder. If you can't find it there, reach out to us with (1) your name (2) pledge number, at our email provided above.
Where are my digital Files? You can track the progress on this Production Sheet. Our PDFs are not ready yet, but the STLs have been sent via MyMiniFactory already. Upgrades to add-ons with STL rewards will be sent after the BackerKit closes around early March.
Work In Progress
Character cards WIP.
Dice design was finalized and sent to tooling and prototype production.
Magic Items cards WIP, these are just a part of the whole lot. Crafting over 50 magic items is a lot of downtime activity.
Two minis from the second batch of prototyping, looking great!
Your enthusiasm and support fuel our journey, and we're thrilled to be on this adventure with you. As always, thank you for being such an integral part of the Mammoth family!
Rampage on!
The Mammoth Team
Join the Mammoth Community! 💜
In our community we have: technical support (3D printing), weekly d&d playtests, painting feedback and hangout space, adventure feedback & idea channels, and also a direct way to communicate with our team. We are always happy to hear your questions and thoughts!
The Dragon Trappers Lodge are a wonderful job in releasing two (!) STL collections a month - one designed for use in fantasy roleplaying adventures, and one for wargaming, mass battle tabletop games - though you can use the models in any way you want. they tackle staple RPG monsters with a unique take (some give us nightmares), go have a look at their Patreon and Tribes.
Backerkit Surveys are on their way! All you need to know! (Action Required) | Mammoth Mass Combat Playtest | WIP Magic Items, Character Cards and more!
4 months ago
– Fri, Jan 05, 2024 at 01:12:50 PM
Our Backerkit surveys are on their way, woohoo!
Dear Mammoths! Happy 2024!
It is time to confirm and or upgrade your order! Were excited to show you what we have been working on, and give you a few previews of what is to come!
In this update:
PhysicalPledge Manager (Action Required)
WIP previews of Magic items & Character cards
Playtesting Material - Mammoth Mass Combat 2.0
Pledge Managers ⚠ Please read the 3 sections carefully
1) In the next few days you should be receiving an email from our Backerkit Pledge Manager.
Through the Backerkit survey you will:
Confirm or upgrade your Pledge Level.
If you want to upgrade your pledge level, click the "Switch your pledge" link beneath the "Get Started" button. You cannot upgrade after passing this screen.
Confirm Add-ons. If there is any error here, please contact us before proceeding.
Add Add-ons.
Provide your address.
**SHIPPING IS CHARGED LATER**
As products are not produced yet, we cannot calculate exact shipping rates yet.
We will send ANOTHER email once we have the exact shipping rates, closer to date.
2) Backerkit Pledge Manager will be closed at the END of February 2024.
3) MyMiniFactory, STL & Digital file delivery.
ALL STLs (except stretch goals) have been successfully sent via MyMiniFactory (Read previous update for details). PDF and all other digital assets have NOT been sent yet.
[Apple Pay Notice] If you paid using Apple Pay and you have the feature turned on that hides your email, you will not get a survey and will have to reach out to Backerkit directly, giving them your details so they can find your pledge and manually change the email.
WIP - How are things coming along?
Every update we will start trickling in some previews of items that are close to being ready for production. We have been hard at work crafting & writing to get this mammoth of a project ready for production. Many of you have prodded us to show more WIP so here they are!
Keep track of our progress: Production Overview Document
We have been developing this system for over a year now, we are very excited to take it to the next level. Please, feel free to download this document and give us feedback & your thoughts!
Do you want to playtest with us?
Get in touch with Lukas our head of operations to get into our organized playtesting group that we run once a week on average!
Pre-Order Store Open & STL Fulfilment via MyMiniFactory (NOT PDF, NOT Physical Fulfilment, Not Stretch Goals)
5 months ago
– Tue, Dec 19, 2023 at 01:58:26 PM
Pre-order store Open! and STLs are sent!
Dear Mammoths, we have been hard at work to get all the prototyping sent and all getting all the new art commissioned, it is actually very exciting times that allows us to make creative decisions, hire people and make some cool loot!
PLEASE NOTE - TheBackerKit Pledge Manager willbe onlysent next week.
In the next few days you will receive an email from MyMiniFactory.com to the email you use on Kickstarter (we call it your Kickstarter-Email)
Click the 'Redeem' button in the email and the files will be attributed to your MyMiniFactory library.
If you already have a MyMiniFactory Account - the files are might already be on your MyMiniFactory account Library IF your Kickstarter-Email & MyMiniFactory-Email are the same.
1) The emailfrom MyMiniFactory will look like this
2) Sign up / Login:
Join the Mammoth Community! 💜
In our community we have: technical support (3D printing), weekly d&d playtests, painting feedback and hangout space, adventure feedback & idea channels, and also a direct way to communicate with our team. We are always happy to hear your questions and thoughts!
This Patreon - is doing dnd miniatures and adventures SO WELL it nearly makes us feel bad for trying! Joking aside, they are great lads from Australia that are passionate about miniatures and adventures - and they kick ass at making both, they make 32mm & 75mm scale models and amazing 5e Adventures too.
Check their beautiful work from their PATREON - with over 1000 subscribers, they are killing it!
Check them out!
🎉 MAMMOTHS WE DID IT! 🦣 | PLEDGE MANAGER | LATE PLEDGE | PATREON
6 months ago
– Sun, Nov 19, 2023 at 08:23:54 AM
We did it!
Thank you Mammoths!
The Rampage is stomping strong! You made this project a reality! Now things go from PDFs to Physical... to people shelves... from STLs to Physical minis. You helped to take our little studio to make this next big step into the next level of production! And it would genuinely not be possible without you. Thank you for supporting independent creators!
Pledge Management / Upgrades
People who backed the Kickstarter will get an email in two weeks that will give access to our Backer Kit Pledge Manager where you will be able to:
Give us your shipping info (Paying for it will come later)
Add any add-ons
Increase your pledge level
Upgrade your Hardcover (Normal -> Deluxe)
Claim your free die (Only people who backed in the first 72 hours)
STLs- The MyMiniFactory will give you STL upgrade options. This Pledge manager will be accessible for anyone that backed an STL option Directly as a separate email too.
Estimated production schedule will be released in the NEXT update.
NOTE: All the physical Industrial Resin miniatures - are shipped separately.
Late Pledge / Pre-order (if you missed the KS)
Our Backer Kit & MyMiniFactory Pledge Manager will be available later this week. We are doing what we can to get it active as soon as possible.
Mammoth Patreon - We opened 100 spots at the Mastadon (PDF & Foundry) Early Bird Tier ($2.99 instead of $5)
We are currently releasing via our patreon the first chapter (Early Access Version) of our 4th book called 'The Immortal Flame' to our patreons / tribers. Each months release has a an extensive playtested 5e adventures that is a standalone and can be part of the full book. That adventure comes as a PDF that includes VTT tokens / Paper Minis, Foundry conversion and if you have a 3D printer - the STL Miniatures.
In our community we have: technical support (3D printing), weekly d&d playtests, painting feedback and hangout space, adventure feedback & idea channels, and also a direct way to communicate with our team. We are always happy to hear your questions and thoughts!
Artists We Love - BigBadEvilGuy - Boss Fights & Minions!
Our talented friends over at Arcane Minis are one of the best patreons out there for 5e content! They make exceptional AIR SHIPS campaigns content on their main Patreon, but they just launched a brand new AMAZING Patreon BigBadEvilGuy that focusses on BBEGs and Minions! Looks at these bad boys! (Pun intended)